San Francisco / Oceanview/Merced/Ingleside

Da Pan

3995 Alemany Blvd Ste 3001

Last inspected: April 30, 2025

Inspection History

April 30, 2025

Reinspection

Pass

114157Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines.

114159Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines.

March 6, 2025

Reinspection

Pass

114130-114130.5Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114132Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114133Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114137Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114139Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114153Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114163Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114165Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114167Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114169Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114175Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114177Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114180Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114182Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

March 5, 2025

Routine

Closure

114259Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., - Submit additional documents as instructed., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., - IMMEDIATE HEALTH PERMIT SUSPENSION AND CLOSURE The permit to operate the above named food facility is hereby temporarily suspended, and the facility is ordered immediately closed under the authority of Sections 114405 and 114409 of Division 104, Part 7, Chapter 13, Article 3 of the California Health and Safety Code and/or City and County of San Francisco Health Code §§ 440 (j) and 440.1. The attached Inspection Report specifies the conditions that warrant this closure and the Sections of the law that are being violated. Any food facility for which the permit has been temporarily suspended shall cease all food handling, close and remain closed until all conditions warranting the closure are corrected and your permit has been reinstated by a representative of Environmental Health. You are hereby notified that you have the right to request a hearing, within 15 calendar days after service of this Notice to show cause why the permit suspension is not warranted. Your failure to request a hearing within 15 calendar days shall be deemed a waiver of your right to a hearing. An owner, manager or operator who fails to comply with this Closure Notice may be found guilty of a misdemeanor, with a possible fine of $1,000.00 and/or imprisonment for not more than six months for each offense. This Health Permit Suspension and Closure Notice is issued to you under the authority of the California Health and Safety Code, Division 104, Part 7, Chapter 13, Article 3. Copies of the Code Sections referred to herein may be reviewed at most public libraries, the Internet, or at Environmental Health. Contact this office at the number noted above, during normal days of business to request a re-inspection, or if you have any questions. If you are calling after 4:30 pm or on weekends, leave a message at (415) 252-3800 and an inspector/on call staff will call you back at their earliest convenience. The CLOSED placard was issued and posted this date. The Closure placard shall not be removed, moved, blocked, or obstructed in any manner. The Closure placard shall only be removed by an inspector from this Department.

114259.1Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., - Submit additional documents as instructed., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., - IMMEDIATE HEALTH PERMIT SUSPENSION AND CLOSURE The permit to operate the above named food facility is hereby temporarily suspended, and the facility is ordered immediately closed under the authority of Sections 114405 and 114409 of Division 104, Part 7, Chapter 13, Article 3 of the California Health and Safety Code and/or City and County of San Francisco Health Code §§ 440 (j) and 440.1. The attached Inspection Report specifies the conditions that warrant this closure and the Sections of the law that are being violated. Any food facility for which the permit has been temporarily suspended shall cease all food handling, close and remain closed until all conditions warranting the closure are corrected and your permit has been reinstated by a representative of Environmental Health. You are hereby notified that you have the right to request a hearing, within 15 calendar days after service of this Notice to show cause why the permit suspension is not warranted. Your failure to request a hearing within 15 calendar days shall be deemed a waiver of your right to a hearing. An owner, manager or operator who fails to comply with this Closure Notice may be found guilty of a misdemeanor, with a possible fine of $1,000.00 and/or imprisonment for not more than six months for each offense. This Health Permit Suspension and Closure Notice is issued to you under the authority of the California Health and Safety Code, Division 104, Part 7, Chapter 13, Article 3. Copies of the Code Sections referred to herein may be reviewed at most public libraries, the Internet, or at Environmental Health. Contact this office at the number noted above, during normal days of business to request a re-inspection, or if you have any questions. If you are calling after 4:30 pm or on weekends, leave a message at (415) 252-3800 and an inspector/on call staff will call you back at their earliest convenience. The CLOSED placard was issued and posted this date. The Closure placard shall not be removed, moved, blocked, or obstructed in any manner. The Closure placard shall only be removed by an inspector from this Department.

114259.4Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., - Submit additional documents as instructed., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., - IMMEDIATE HEALTH PERMIT SUSPENSION AND CLOSURE The permit to operate the above named food facility is hereby temporarily suspended, and the facility is ordered immediately closed under the authority of Sections 114405 and 114409 of Division 104, Part 7, Chapter 13, Article 3 of the California Health and Safety Code and/or City and County of San Francisco Health Code §§ 440 (j) and 440.1. The attached Inspection Report specifies the conditions that warrant this closure and the Sections of the law that are being violated. Any food facility for which the permit has been temporarily suspended shall cease all food handling, close and remain closed until all conditions warranting the closure are corrected and your permit has been reinstated by a representative of Environmental Health. You are hereby notified that you have the right to request a hearing, within 15 calendar days after service of this Notice to show cause why the permit suspension is not warranted. Your failure to request a hearing within 15 calendar days shall be deemed a waiver of your right to a hearing. An owner, manager or operator who fails to comply with this Closure Notice may be found guilty of a misdemeanor, with a possible fine of $1,000.00 and/or imprisonment for not more than six months for each offense. This Health Permit Suspension and Closure Notice is issued to you under the authority of the California Health and Safety Code, Division 104, Part 7, Chapter 13, Article 3. Copies of the Code Sections referred to herein may be reviewed at most public libraries, the Internet, or at Environmental Health. Contact this office at the number noted above, during normal days of business to request a re-inspection, or if you have any questions. If you are calling after 4:30 pm or on weekends, leave a message at (415) 252-3800 and an inspector/on call staff will call you back at their earliest convenience. The CLOSED placard was issued and posted this date. The Closure placard shall not be removed, moved, blocked, or obstructed in any manner. The Closure placard shall only be removed by an inspector from this Department.

114259.5Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., - Submit additional documents as instructed., 114047, 114049, 114051, 114053, 114055, 114069(b) - Elevate all food at least 6 inches off of the floor to prevent contamination. Properly label bulk ingredient/food containers with common name., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., - IMMEDIATE HEALTH PERMIT SUSPENSION AND CLOSURE The permit to operate the above named food facility is hereby temporarily suspended, and the facility is ordered immediately closed under the authority of Sections 114405 and 114409 of Division 104, Part 7, Chapter 13, Article 3 of the California Health and Safety Code and/or City and County of San Francisco Health Code §§ 440 (j) and 440.1. The attached Inspection Report specifies the conditions that warrant this closure and the Sections of the law that are being violated. Any food facility for which the permit has been temporarily suspended shall cease all food handling, close and remain closed until all conditions warranting the closure are corrected and your permit has been reinstated by a representative of Environmental Health. You are hereby notified that you have the right to request a hearing, within 15 calendar days after service of this Notice to show cause why the permit suspension is not warranted. Your failure to request a hearing within 15 calendar days shall be deemed a waiver of your right to a hearing. An owner, manager or operator who fails to comply with this Closure Notice may be found guilty of a misdemeanor, with a possible fine of $1,000.00 and/or imprisonment for not more than six months for each offense. This Health Permit Suspension and Closure Notice is issued to you under the authority of the California Health and Safety Code, Division 104, Part 7, Chapter 13, Article 3. Copies of the Code Sections referred to herein may be reviewed at most public libraries, the Internet, or at Environmental Health. Contact this office at the number noted above, during normal days of business to request a re-inspection, or if you have any questions. If you are calling after 4:30 pm or on weekends, leave a message at (415) 252-3800 and an inspector/on call staff will call you back at their earliest convenience. The CLOSED placard was issued and posted this date. The Closure placard shall not be removed, moved, blocked, or obstructed in any manner. The Closure placard shall only be removed by an inspector from this Department.