Pancake Boy

4007 24Th St

Last inspected: October 22, 2024

Inspection History

October 22, 2024

Reinspection

Pass

August 30, 2024

Site Visit

Pass

August 28, 2024

Reinspection

Pass

114067(fProvide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114099Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114099.3Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114099.5Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114101.1Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114101.2Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114101(a)Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114103Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114107Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

114125)Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.

August 22, 2024

Routine

Pass

113980Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

113984 (aEnsure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

113986Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114060Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114067 (aEnsure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114069Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114073Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114077Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114089.1(c)Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.

114143(c)Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113947 - Provide training to staff regarding safe food handling practices, adequate allergen knowledge and/or assigned duties., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114171, 114189.1, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269 - Protect the potable water supply with a backflow protection device, as required by applicable plumbing codes. All plumbing, plumbing fixtures, and grease interceptors shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose., 114157, 114159 - Maintain onsite an accurate, easily readable metal probe thermometer suitable for measuring temperature of food shall be available. A display thermometer +/- 2F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114067(f, g), 114099, 114099.3, 114099.5, 114101(a), 114101.1, 114101.2, 114103, 114107, 114125) - Provide an approved warewashing facility. Obtain chlorine test strips to monitor chlorine sanitizer solutions and mechanical dishwasher. Obtain quaternary ammonia test strips to monitor quaternary ammonia sanitizer solutions., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment.