GrubVetter
San Francisco / Nob Hill

Nob Hill Cafe

1152 Taylor St

CP

Last inspected: December 8, 2025

Inspection History

December 8, 2025
Conditional Pass
CP
113984(d)Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114097Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.1Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.4Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.6Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114101(bProperly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114105Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114109Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114111Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114113Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114117Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114125(b)Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114141Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
11415 (aProperly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
December 8, 2025
Conditional Pass
CP
113984(d)Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114097Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.1Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.4Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114099.6Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114101(bProperly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114105Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114109Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114111Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114113Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114117Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114125(b)Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
114141Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
11415 (aProperly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable., 114087, 114089, 114090, 114094, 114094.5, 114365.2 - Discontinue misbranding foods to mislead consumers., 113947.1-113947.6, 113948 - Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.
September 30, 2024
Routine
Pass
P
113947.1-113947.6Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114259, 114259.1, 114259.4, 114259.5 - Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 113953, 113953.1, 113953.2, 114067(f) - Provide soap and single-use towels in dispensers, or a drying device at each handwash sink at all times. Maintain all handwash sinks unobstructed and accessible at all times., - Submit additional documents as instructed.
113948Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site., - Food, equipment, or utensils that are found to be unsanitary or in disrepair may be Voluntarily Condemned and Destroyed by the person in charge., 114259, 114259.1, 114259.4, 114259.5 - Eliminate the infestation/activity of cockroaches/rodents/flies/vermin from the food facility by using only approved methods. Remove all evidence of the infestation and thoroughly clean and sanitize all affected surfaces. Construct, equip, maintain and operate the food facility so as to prevent the entrance and harborage of animals, birds and vermin including, but not limited to, rodents and insects., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114074, 114081, 114119, 114121, 114161, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5 - All clean and soiled linen shall be properly stored; non-food items shall be stored and displayed separate from food and food-contact surfaces. Utensils and equipment shall be handled and stored so as to be protected from contamination., 113953, 113953.1, 113953.2, 114067(f) - Provide soap and single-use towels in dispensers, or a drying device at each handwash sink at all times. Maintain all handwash sinks unobstructed and accessible at all times., - Submit additional documents as instructed.
May 2, 2024
Pass
P
113953Hand sinks shall be sufficient in number and conveniently located so as to be accessible at all times., 114060 - Food on display shall be protected from contamination by approved a sneeze guard (e.g. vertical glass sneezeguard 60" Above Finished Floor)., 114099 - Sink compartments shall be large enough to accommodate the immersion of the largest equipment and utensils., 114192, 113953 - Pressurized warm water shall be provided by all handwashing sinks for a minimum of 15 seconds through a mixing valve or combination faucet. At handwashing sinks where the water temperature provided is not readily adjustable at the faucets, warm water between 100°F-108°F shall be provided., 114279, 114281, 114282 - After use, mops shall be placed in a position that allows them to air-day without soiling walls, equipment, or supplies, e.g. wall-mounted mop rack., 114276, 114149, SF Health Code Section 440.5 - A permanent food facility shall provide clean toilet facilities in good repair for use by employees., 114192, 113953 - The water supply shall be from a water system approved by the local enforcement agency. , 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114149.1 - Mechanical exhaust ventilation equipment shall be provided over all cooking equipment as required to effectively remove cooking odors, smoke, steam, grease, heat, and vapors., 114047, 114153 - Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114268 - The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114268 - Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches.
113953(b)Hand sinks shall be sufficient in number and conveniently located so as to be accessible at all times., 114060 - Food on display shall be protected from contamination by approved a sneeze guard (e.g. vertical glass sneezeguard 60" Above Finished Floor)., 114099 - Sink compartments shall be large enough to accommodate the immersion of the largest equipment and utensils., 114192, 113953 - Pressurized warm water shall be provided by all handwashing sinks for a minimum of 15 seconds through a mixing valve or combination faucet. At handwashing sinks where the water temperature provided is not readily adjustable at the faucets, warm water between 100°F-108°F shall be provided., 114279, 114281, 114282 - After use, mops shall be placed in a position that allows them to air-day without soiling walls, equipment, or supplies, e.g. wall-mounted mop rack., 114276, 114149, SF Health Code Section 440.5 - A permanent food facility shall provide clean toilet facilities in good repair for use by employees., 114192, 113953 - The water supply shall be from a water system approved by the local enforcement agency. , 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114149.1 - Mechanical exhaust ventilation equipment shall be provided over all cooking equipment as required to effectively remove cooking odors, smoke, steam, grease, heat, and vapors., 114047, 114153 - Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114268 - The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114268 - Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches.
May 2, 2024
Pass
P
113953Hand sinks shall be sufficient in number and conveniently located so as to be accessible at all times., 114060 - Food on display shall be protected from contamination by approved a sneeze guard (e.g. vertical glass sneezeguard 60" Above Finished Floor)., 114099 - Sink compartments shall be large enough to accommodate the immersion of the largest equipment and utensils., 114192, 113953 - Pressurized warm water shall be provided by all handwashing sinks for a minimum of 15 seconds through a mixing valve or combination faucet. At handwashing sinks where the water temperature provided is not readily adjustable at the faucets, warm water between 100°F-108°F shall be provided., 114279, 114281, 114282 - After use, mops shall be placed in a position that allows them to air-day without soiling walls, equipment, or supplies, e.g. wall-mounted mop rack., 114276, 114149, SF Health Code Section 440.5 - A permanent food facility shall provide clean toilet facilities in good repair for use by employees., 114192, 113953 - The water supply shall be from a water system approved by the local enforcement agency. , 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114149.1 - Mechanical exhaust ventilation equipment shall be provided over all cooking equipment as required to effectively remove cooking odors, smoke, steam, grease, heat, and vapors., 114047, 114153 - Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114268 - The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114268 - Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches.
113953(b)Hand sinks shall be sufficient in number and conveniently located so as to be accessible at all times., 114060 - Food on display shall be protected from contamination by approved a sneeze guard (e.g. vertical glass sneezeguard 60" Above Finished Floor)., 114099 - Sink compartments shall be large enough to accommodate the immersion of the largest equipment and utensils., 114192, 113953 - Pressurized warm water shall be provided by all handwashing sinks for a minimum of 15 seconds through a mixing valve or combination faucet. At handwashing sinks where the water temperature provided is not readily adjustable at the faucets, warm water between 100°F-108°F shall be provided., 114279, 114281, 114282 - After use, mops shall be placed in a position that allows them to air-day without soiling walls, equipment, or supplies, e.g. wall-mounted mop rack., 114276, 114149, SF Health Code Section 440.5 - A permanent food facility shall provide clean toilet facilities in good repair for use by employees., 114192, 113953 - The water supply shall be from a water system approved by the local enforcement agency. , 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114149.1 - Mechanical exhaust ventilation equipment shall be provided over all cooking equipment as required to effectively remove cooking odors, smoke, steam, grease, heat, and vapors., 114047, 114153 - Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114268 - The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114268 - Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches.