GrubVetter

Mr. Pizza Man

2680 22Nd St

P

Last inspected: February 27, 2025

Inspection History

February 27, 2025
Complaint (R)
Pass
P
January 27, 2025
Complaint (I)
Pass
P
November 15, 2024
Routine
Pass
P
114123Eliminate sewage backflow into the facility. Clean and sanitize all areas contaminated with sewage with a bleach solution (1 cup bleach per 9 cups water).Hire a licensed plumbing contractor if necessary. All contaminated food items must be discarded. All items that cannot be properly sanitized must be discarded., 113980, 113984 (a, b, d, e, f), 113986, 114060, 114067 (a, d, e), 114069, 114073, 114077, 114089.1(c), 114143(c) - Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113953(c), 114163(a)(3), 114189, 114192.1, 114195, 114279 - Immediately provide hot running potable water of at least 120°F or greater for the entire food preparation facility., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 113977 - Discontinue allowing employees to eat, drink, or smoke in any work area., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable.
114197Eliminate sewage backflow into the facility. Clean and sanitize all areas contaminated with sewage with a bleach solution (1 cup bleach per 9 cups water).Hire a licensed plumbing contractor if necessary. All contaminated food items must be discarded. All items that cannot be properly sanitized must be discarded., 113980, 113984 (a, b, d, e, f), 113986, 114060, 114067 (a, d, e), 114069, 114073, 114077, 114089.1(c), 114143(c) - Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113953(c), 114163(a)(3), 114189, 114192.1, 114195, 114279 - Immediately provide hot running potable water of at least 120°F or greater for the entire food preparation facility., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 113977 - Discontinue allowing employees to eat, drink, or smoke in any work area., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable.
114328(o)Eliminate sewage backflow into the facility. Clean and sanitize all areas contaminated with sewage with a bleach solution (1 cup bleach per 9 cups water).Hire a licensed plumbing contractor if necessary. All contaminated food items must be discarded. All items that cannot be properly sanitized must be discarded., 113980, 113984 (a, b, d, e, f), 113986, 114060, 114067 (a, d, e), 114069, 114073, 114077, 114089.1(c), 114143(c) - Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser., 113953(c), 114163(a)(3), 114189, 114192.1, 114195, 114279 - Immediately provide hot running potable water of at least 120°F or greater for the entire food preparation facility., 113984(d), 114097, 114099.1, 114099.4, 114099.6, 114101(b, c, d), 114105, 114109, 114111, 114113, 11415 (a, b, D), 114117, 114125(b), 114141 - Properly wash, rinse and sanitize all food contact surfaces. Make a 100 ppm bleach sanitizing solution or a 200 ppm quaternary ammonia solution for the third compartment., 114115 (b,c) - Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment., 114002, 114002.1 - Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113952, 113953.3, 113953.4, 113961, 113973 - Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment., 113977 - Discontinue allowing employees to eat, drink, or smoke in any work area., 114143(d), 114266, 114268, 114268.1, 114271, 114272 - Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair., 114130-114130.5, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182 - Ensure all equipment is approved, properly installed, clean, and maintained in good repair. Ensure all appliances are NSF-approved, commercial grade, durable, and easily cleanable.