Mixt
1210 9Th Ave
P
Last inspected: June 9, 2025
Inspection History
June 9, 2025
New Ownership (R)
Pass
P
May 21, 2025
Reinspection
Pass
P
113725.1Post health inspection placard in a conspicuous location. Post handwashing signs in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. "No smoking" signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. The most recent routine inspection report shall be maintained at the food facility and a sign shall be posted to advise patrons of its availability for review. The health permit must be posted in a conspicuous location.
113953.5Post health inspection placard in a conspicuous location. Post handwashing signs in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. "No smoking" signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. The most recent routine inspection report shall be maintained at the food facility and a sign shall be posted to advise patrons of its availability for review. The health permit must be posted in a conspicuous location.
113978Post health inspection placard in a conspicuous location. Post handwashing signs in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. "No smoking" signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. The most recent routine inspection report shall be maintained at the food facility and a sign shall be posted to advise patrons of its availability for review. The health permit must be posted in a conspicuous location.
114075(c)Post health inspection placard in a conspicuous location. Post handwashing signs in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. "No smoking" signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. The most recent routine inspection report shall be maintained at the food facility and a sign shall be posted to advise patrons of its availability for review. The health permit must be posted in a conspicuous location.
114276(f)(1)Post health inspection placard in a conspicuous location. Post handwashing signs in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. "No smoking" signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. The most recent routine inspection report shall be maintained at the food facility and a sign shall be posted to advise patrons of its availability for review. The health permit must be posted in a conspicuous location.
May 20, 2025
Routine
Pass
P
114002Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113996, 113998, 114037, 114429, 114429.3, 114429.5 - Keep potentially hazardous foods (PHF) cold at 41°F or below or hot held at 135°F or above. Immediately discontinue storing PHF at room temperature.
114002.1Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline., 113996, 113998, 114037, 114429, 114429.3, 114429.5 - Keep potentially hazardous foods (PHF) cold at 41°F or below or hot held at 135°F or above. Immediately discontinue storing PHF at room temperature.
May 9, 2025
Pass
P
May 9, 2025
Pass
P
May 2, 2025
Pass
P
May 2, 2025
Pass
P
March 4, 2025
Pass
P
March 4, 2025
Pass
P
December 12, 2024
Pass
P
114268Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches., 113953, 113953(b) - Provide minimum 6 inches high side splashguard(s) with rounded corners., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114130, 114169 - All equipment shall be installed on castors, six (6) inch high round metal legs, or on a minimum four (4) inch high curb or pedestal with a continuously coved base at the juncture., 114193, 114193.1, 114269 - An air gap between the water supply inlet and the flood level rim of the plumbing fixture shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114099 - Provide a 3-compartment sink with two integral metal drainboards for manually washing, rinsing, and sanitizing equipment and utensils., 114244, 114245 - Provide a floor plan showing the path-of-travel to the refuse storage area., 114130, 114169 - Floor-mounted equipment that is not easily movable shall be sealed to the floor., 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114271(d) - Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning., 114163 - An adjacent table at least 18"x18" (LxW) shall be provided if the food preparation sink does not have an integral drainboard.
December 12, 2024
Pass
P
114268Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches., 113953, 113953(b) - Provide minimum 6 inches high side splashguard(s) with rounded corners., 114130, 114169 - All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. , 114130, 114169 - All equipment shall be installed on castors, six (6) inch high round metal legs, or on a minimum four (4) inch high curb or pedestal with a continuously coved base at the juncture., 114193, 114193.1, 114269 - An air gap between the water supply inlet and the flood level rim of the plumbing fixture shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch., 114271 - Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms., 114193, 114193.1, 114269 - Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel., 114099 - Provide a 3-compartment sink with two integral metal drainboards for manually washing, rinsing, and sanitizing equipment and utensils., 114244, 114245 - Provide a floor plan showing the path-of-travel to the refuse storage area., 114130, 114169 - Floor-mounted equipment that is not easily movable shall be sealed to the floor., 114244, 114245 - Provide a designated area for refuse, recyclables, and compost separate from food, equipment, and utensils., 114266, 114257, 114257.1, 114259 - A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects., 114271(d) - Conduits of all types shall be installed within walls as practicable. When otherwise installed, they shall be mounted or enclosed so as to facilitate cleaning., 114163 - An adjacent table at least 18"x18" (LxW) shall be provided if the food preparation sink does not have an integral drainboard.